If less than half the old paint is left, however, it may be worth stripping it all off. Guertin gets rid of stubborn remnants using shrouded grinders (like the PaintShaver), infrared paint strippers (such as the Speedheater), or chemical strippers (like Multi-Strip), then smooths the wood with a course or two of sanding. When siding (or bank accounts) can't take the shock of a total strip job, Rich O'Neil, of Masterwork Painting in Bedford, Massachusetts, has successfully hidden rough, well-adhered paint under Peel Bond, a thick primer. Westminster House Painting CO
Most of a projects price is the cost of labor at $25 to $75 per hour. However, most contractors bid out based on the entire project which includes all work hours. Hourly rates are only useful if your pro asks to do the job as “time and materials.” However, be wary of this pricing structure, it usually shows the contractor is uncertain how long the project will take.
You can expect to pay between $700 to $3,000 to paint wood siding. You’ll end up spending $1 to $3 per square foot, but typically you’ll find this material is cheaper than brick or vinyl. Wood requires some type of sealant, be it paint, stain or oil. Lumber takes well to a wide variety of coverings giving you endless options for modern, contemporary or classic looks. Some things to consider when choosing wood:

O'Neil patches shallow holes and divots with Ready Patch because it dries fast, sands smooth, and stays flexible. Deep cracks and rotten spots are best repaired with two-step epoxies, such as those made by Advanced Repair Technology. (For a step-by-step instructions, see Repairing Rot with Epoxy.) The days of using polyester auto-body fillers on wood are over. "They cure too hard," says Portland, Oregon–based painting contractor Kathleen George. "They look good at first, but then they peel away." House Painting Westminster
Expect to pay between $600 to $3,500 or $1.25 to $3 per square foot to coat vinyl, with prices likely increasing for the finish. It is one of the more inexpensive siding materials to have repainted, especially with recent innovations in materials. Changing the finish on your siding is not recommended unless it's completely degraded and worn away by the weather. You can save nearly half the vinyl siding installation cost of $4 per square foot by painting rather than replacing. Before adding a new coat to vinyl siding,
Historical home restoration requires a lot of hard work, dedication, and a specialized skillset. In addition to lead paint, many restorations require dry rot removal, and specialized carpentry skills many paint companies don’t have. You won’t find a Portland house painter with more passion for working on old homes. Our full-service approach to project management is what sets us apart. When it comes to historical home restoration projects, we don’t shy away from difficult jobs and never cut corners. Westminster Home Painting
If less than half the old paint is left, however, it may be worth stripping it all off. Guertin gets rid of stubborn remnants using shrouded grinders (like the PaintShaver), infrared paint strippers (such as the Speedheater), or chemical strippers (like Multi-Strip), then smooths the wood with a course or two of sanding. When siding (or bank accounts) can't take the shock of a total strip job, Rich O'Neil, of Masterwork Painting in Bedford, Massachusetts, has successfully hidden rough, well-adhered paint under Peel Bond, a thick primer. Westminster House Painting CO

The next step is to save all the colors you want to try. Once you have all the hues you like, go to the next procedure which is to paint the room. There is a reset button so you can remove all the changes you have made. Get the summary of the colors you used using the Review tab. Finally, save the project in JPG format which is only possible if you have an account. You can also share it on social media sites. Westminster Home Painting

If there is any peeling — and there usually is somewhere — it's essential to scrape off any loose paint. This doesn't just mean the parts that are already separated from the wood and ready to fall off on their own. Each spot where paint has peeled loose needs to be scraped thoroughly until you can no longer get the sharp corner of a putty knife under any of the surrounding edges of paint. Then, the bare spot needs to be sanded until the paint edges are smooth. House Painting Westminster
×